FT SYNTHETICS GOLD
A NEW GENERATION OF UNDERLAYMENTS
FT Synthetics products come with over two decades of research through listening to our customers, engineers, architects, roofing contractors/installers and home owners. Our products provide ultimate high performance and protection for the installer and your home. Our products are fully synthetic, 100% recyclable, offer superior grip protection, excellent UV resistance, are the most pliable and of course are easy to use. They are light weight but durable and provide the best protection available in the market. GOLD is your cost effective and reliable 30 lb felt replacement product, which is easy to carry, and has 5X more coverage per roll as compared to felt.
- GRIPSPOT technology for superior slip resistance
- Lighter weight
- 180 day UV resistant
- NEW! LIFETIME limited warranty
- Greater coverage per roll
- 100% Recyclable water resistant polyolefin construction
- Wrinkle free and low temperature flexibility for ease of installation
- Miami-Dade County Approved NOA 14-1202.05
- Florida Building Code Approved FL20853
- Texas Department of Insurance
|SPECIFICATIONS||FT SYNTHETICS GOLD|
|WIDTH||48" (1.22 M)|
|LENGTH||250' (76.2 M)|
|WEIGHT PER ROLL||32 LB (14.5 KG)|
|ROLLS PER PALLET||36|
|UV RESISTANCE||6 MONTHS|
|TEMPERATURE RANGE||-40°F TO 240°F|
|SPECIFICATIONS||FT SILVER PS-HT|
|WIDTH||36" (91.4 CM)|
|LENGTH||65' (19.8 M)|
|WEIGHT PER ROLL||44 LB (20 KG)|
|ROLLS PER PALLET||30|
|UV RESISTANCE||6 MONTHS|
|TEMPERATURE RANGE||-40°F TO 230°F|
Caution: Always follow Safety Instruction, Building Codes and Safe Work Practices issues by the local Govt. bodies (e.g. OSHA / WCB)
Use: FT Synthetics products are a secondary layer protection approved for installation over plywood with proper fasteners on roof slopes 2:12 and greater. FT Synthetics underlayment is an air, vapor and water barrier with <1 Perm and therefore should be installed above a properly ventilated space. Product is a secondary barrier under a primary roofing product such as asphalt shingles, synthetic shingles, metal, tiles, slate, and cedar shakes.
Preparation: Before installing the underlayment ensure that the roof is dry and clear of any debris or any sharp protrusions.
Installation: FT Synthetics underlayment is laid out horizontally with printed side up using 4” horizontal laps and 6” vertical laps. For prolonged exposure where driving rain or strong winds are expected it is recommended to double the overlaps. For low slope applications between 2:12 to 4:12, it is recommended to overlap 50% plus 1”.
Fastening: FT Synthetics underlayment should be installed with plastic or metal (ring shank or smooth shank) cap-nails or cap-staples. Un-capped staples or standard roofing nails may be used if the primary roofing material is installed within 48 hours (unless rain or high winds are expected). Use of un‑capped fasteners may result in a possibility of blow off or leakage around the fasteners.
Exposure: For short term coverage (48 hours) underlayment can be fastened using every other anchoring position as printed on the product. For extended exposure fasten the product using every anchoring position as printed on the product. All anchoring must be performed flush to the roof, 90 degrees to the roof deck that will hold the material tightly with the plywood. Product has 180 Days UV protection, but it should not be considered a final roofing system. A proper final roofing system should be installed over the product to get the proper protection.
FT Synthetics products are designed with the GRIPSPOT technology for better skid protection for the roofer but product may become slippery due to high moisture, frost, rain, water, dust, debris or other conditions. Use precautions when working on the roof. Follow all local and federal safety codes when installing any roofing system including FT Synthetics products. Failure to adhere to those procedures may result in serious injury or even death.
GOLD Dual Logo Program
Take advantage of low-cost marketing with our GOLD Dual Logo Program and receive majority branding alongside our own logo and contact information. You’ll be recognized in the community as a leader in sustainable roofing practices and gain valuable exposure for your business.
Private Label Programs Take rooftop marketing to the highest level with our Private Label Programs. FT Synthetics can design, produce, and print unique products that exclusively feature your branding. Add logos, contact info, and special promotions for maximum visibility with an industry-leading product.